20231004

amiciSmart Over & Under Voltage Protection







amiciSmart Over & Under Voltage Protection


amiciSmart Over & Under Voltage Protection

Introduction

Welcome to the world of amiciSmart Over & Under Voltage Protection. This innovative device offers a comprehensive range of protection features to ensure the safety and efficiency of your electrical circuits. With its advanced technology and user-friendly design, it is a must-have for every household and office.

Main Features

Pre-Closing Detection

The automatic power loss protection switch controls the circuit and will not close if any over-voltage, leakage, over-current, or other failures occur.

Over-voltage Protection

When the voltage between the live wire and the naught wire of the input terminal is greater than the specified value, it will trigger the switch for protection.

Low Voltage Protection

When the voltage between the live wire and the naught wire of the input terminal is less than the specified value, it will trigger the switch for protection.

Over-current Protection

When the actual current is greater than or equal to 1.15 times the rated current for 3 seconds, it will trigger the switch for protection.

Leakage Protection

When a leakage current exceeds a predetermined value or an electric shock occurs, the automatic re-loss switch will be turned off for 0.1 seconds to ensure personal safety.

Protection against Disconnecting the Neutral Line

When the three-phase voltage is not balanced to a certain level due to a free or disconnected external neutral line, the switch is turned off for protection.

Auto Power Off when Power On does not Light Up

The switch will be automatically disconnected when the circuit is turned off, and the power supply will be automatically re-closed after restoring.

Intelligent Leak Identification

Automatic detection before closing, if the voltage is normal and the neutral line is well connected, it never closes in case of any failure.

Automatic Repeat Playback

Automatically repeated after a certain time interval if the above-mentioned failure occurs.

Automatic Shutdown Information Saving

Automatic saving of shutdown information such as shutdown time, shutdown type (cause), voltage, current, and leakage current for fault analysis.

Additional Features

  • Leakage (includes earth leakage) and Surge (Lightning) protection
  • Real-time display of Voltage and Current
  • Complete protection of all kinds (supply side as well load side) for the whole house
  • Fully adjustable (Over Voltage, Under Voltage, Over Current)
  • Checks faults first in the circuit before closing the breaker
  • 12 Months Warranty

Frequently Asked Questions

Q: What is the maximum rated current for the amiciSmart Over & Under Voltage Protection device?

A: The maximum rated current for this device is 63A.

Q: Is it suitable for both residential and commercial use?

A: Yes, it is suitable for both households and offices.

Q: Can I adjust the Over Voltage, Under Voltage, and Over Current settings?

A: Yes, the device is fully adjustable, allowing you to customize the protection levels according to your needs.

Q: Does it provide real-time monitoring of Voltage and Current?

A: Yes, the device offers a real-time display of Voltage and Current, providing you with accurate information at all times.

Q: Does it come with a warranty?

A: Yes, the amiciSmart Over & Under Voltage Protection device comes with a 12 Months Warranty for your peace of mind.

Thank you for choosing amiciSmart Over & Under Voltage Protection. Experience the ultimate protection for your electrical circuits today!